Isiflo Sprint for gas - NEW!

Isiflo Sprint is our new patented range of composite push-fittings combining the safety and strength of a traditional mechanical fitting with the userfriendliness of a standard push-fitting.

The installation of Isiflo Sprint happens in one simple move, requires no tools and no complicated preparation of the pipe. Just cut the pipe scarely and insert, with a slight twist, into the fitting. The result is a strong, firm and long-lasting connection between the pipe and the coupling. PS! Remember to always use a support insert when installing fittings for GAS

 

 
   


Features and Benefits

The high tech composite material combined with the product’s function and design gives the coupling a great deal of benefits and unique features:

 

100% Corrosion resistant
Lead-free
Push-in solution that secures tight and reliable fitting without special tools
Strong like metal
No material sag over time
Installation can be carried out regardless of temperature and weather conditions
Simple and user friendly, minimizes the possibility of incorrect assembly
Fast to use, the installation of Isiflo Sprint happens in one simple move and provides for effective working
Approved to be buried under ground
Approved for freezing water
20 years of product warranty
Packed in single bags with the installation procedure printed on each bag
Approved for gas

R&D
The ISIFLO Sprint range of fittings are the result of comprehensive work undertaken by our own R&D department. The goal was to develop a user-friendly push-in fitting with focus on strength, performance and quality. The ISIFLO R&D department works in close co-operation with the Norwegian Center of Expertise, SINTEF, and are also involved in the establishment of The National Centre of Composite.

Production and quality
The Isiflo range of products are Norwegian quality products, produced in accordance with the strictest requirement of HES and QA-systems. Through extensive investments in advanced tools, materials - and process development, we have developed an efficient and environmentally friendly production and environmentally friendly products with long duration.

ISIFLO Sprint is produced in a glass-fibre reinforced engineering thermoplastic material. This material combines the strength of metal, with the corrosion-resistant characteristics of a thermoplastic material, and gives outstanding mechanical strength in the area of threads.

Raufoss Water & Gas AS holds ISO 14001 and ISO 9001 : 2000.

Function description
There is no need to chamfer the pipe-end before installation. The design of the new fitting ensures that the pipe enters the fitting easily, avoiding the need for a high push-in force. As the pipe enters the fitting, the pushback ring moves in the opposite direction, compressing the O-ring as the clamp ring grips the pipe. This ensures a leak tight connection - even under low pressure conditions. The same happens when you tighten the nut in an ordinary mechanical fitting. The main difference is that everything happens in one move, without the need for tools.

Area of applications
Gas EN437

Isiflo Sprint fittings gives a tight and firm end-load resistant connection with the following pipes:

ISIFLO Sprint for GAS
PE50, PE80, PE100 ref. standard EN1555 PS! Remember to always use a support insert when installing fittings for GAS!

Working pressure
Gas: -up to 10 bar (with support insert)
Burst pressure: - pipe burst before the coupling

Materials
Body: PA GF (Glass reinforced Polyamid)
Clamping ring: POM
Pushback ring: POM
O-Ring: NBR

Installation procedure:

1. Cut the pipe as squarely as possible, checking that it is clean and free from damage. Install the support insert.
2. Mark the installation depth on the pipe. The correct depth is indicated on each fitting.
3. Insert the pipe into the fitting with a slight twist. The twisting action reduces the installation force required to make the joint. No tools required.

1. Cut the pipe as squarely as possible, checking that it is clean and free from damage. Install the support insert.2. Mark the installation depth on the pipe. The correct depth is indicated on each fitting.3. Insert the pipe into the fitting with a slight twist. The twisting action reduces the installation force required to make the joint. No tools required.

 

PS: The pipe is fully inserted when the installation mark lines up with the edge of the fitting. 


On threaded fittings, grip the wrench on the highlighted area when tightening.

 

Tests and approvals for GASS
Germany: VP600 (in process)
The Netherlands : KIWA GASTEC

The certificates are consecutively published at our web site/documentation: www.isiflo.com

 

 Isiflo Sprint gas catalogue 2017 

 Isiflo Composite catalogue 2017 

Isiflo Sprint flyer 2017 

2016 Isiflo Product catalogue - all products